Specifications
1.Double stage and high vacuum
2..CE
3. Various flow capacity
4.Manufacture
ZJA series Double Stage High Vacuum Transformer Oil Recycling Machine / Used Transformer Oil Recycling Machine
I Brief Introduction
ZJA series Double Stage High Vacuum Transformer Oil Recycling Machine / Used Transformer Oil Recycling Machine is mainly used to improve the properties of transformer oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system.ZJA series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
II Characteristics
1. ZJA series Double Stage High Vacuum Transformer Oil Recycling Machine / Used Transformer Oil Recycling Machine has one pot with two-stage vacuum-segregating space, it come into being different pressure so as to keep oil line balance between two stages.
2. The pump of this product is adopted vacuum-pump
3.As the new technology, vacuum-segregating (Patent No. ZL200420061085.6) employs particular spinning disk and stainless steel machine with dehydration and air pump so that enlarge the area of segregating and coming to three-dimensional evaporation.
4.Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life.
5. Oil level control adopt photoelectric way which the main components is
6. As the clients requirement, they could choose equipment which their components were all or partly
7. ZJA series Recycled Transformer Oil Machine / Used Transformer Oil Recycled Machine assemblies
8. Whether clients choose the oil pump from domestic or abroad, they all must be airproofed by our factory, moreover running without noise and leakage. extended oil life.
III Main Parameter
Item |
Parameter |
Type Unit |
ZJA1.8KY |
ZJA3KY |
ZJA6KY |
ZJA9KY |
ZJA12KY |
ZJA18KY |
|
Technical parameter |
Flow Rate |
L/H |
1800 |
3000 |
6000 |
9000 |
12000 |
18000 |
|
Working Vacuity |
Pa |
≤80 |
|||||||
Working pressure |
Mpa |
≤0.35 |
|||||||
Temperature Range |
|
45-65 |
|||||||
Power Supply |
|
50Hz 380V 3-Phase 4-Wire |
|||||||
Total Power |
KW |
18+2.25 |
30+6 |
2X30+6.6 |
3X30+8.2 |
4X30+10 |
5X30+16.5 |
||
Inlet/Outlet Diameter |
mm |
32 / 25 |
38 / 32 |
44 / 38 |
48 / 44 |
64 / 48 |
76 / 64 |
||
Size |
Length |
mm |
1200 |
1500 |
1870 |
1930 |
2160 |
2250 |
|
Width |
mm |
950 |
1150 |
1250 |
1400 |
1600 |
1750 |
||
Height |
mm |
1600 |
2000 |
2200 |
2460 |
2650 |
2650 |
||
Weight |
Kg |
650 |
900 |
1200 |
1600 |
2200 |
3000 |
||
Oil treatment index |
Breakdown Voltage |
KV |
70-75 |
||||||
Water Content |
ppm |
3~5 |
|||||||
Gas Content |
% |
≤0.2 |
|||||||
Filtration accuracy |
µm |
≤1~3 |