Click image to view original image
Specifications
2.Max load:50T tester
3.deformation:+/-0.5%
4.stroke 1400mm
5.test width:400mm
50T UTM Universal Material Tensile Strength Tester
Equipment summary:
UTM Universal Material Tensile Strength Tester is a new material testing machine that combined with the electronic technology and mechanical transmission.it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, it also can be tested the constant-velocity loading, constant- velocity displacement. This machine is simple to operate, especially suitable for controlling quality in production line, This series of machine is mainly applied to test the non-
Main function:
UTM Universal Material Tensile Strength Tester mainly applied to test the
Corresponding standard:
GB/T16491-1996 electronic universal testing machine.
Applicable industry:
UTM Universal Material Tensile Strength Testeris widely used in controlling the quality;Rubber & Plastics;
Technical parameter:
|
Model |
HZ-1009F UTM Universal Material Tensile Strength Tester |
|
Maximum load |
1T,10T,20T,30T,40T,50T |
|
Accurate |
1 grade /0.5 grade |
|
Effective measuring range |
Force from 0.2% to 100% (1 grade) / from 0.4% to 100% (0.5 grade) |
|
Measuring accuracy |
the value ±1% / the value±0.5% |
|
Tester resolution |
Max load 1/200000, constant the resolution |
|
Load sensor |
Basic configuration sensor max load: one |
|
Effective testing width |
400mm (can be widened according to customers requirement ) |
|
Effective tensile stroke |
1000,1200,1400mm (can be increased the height according to customers requirement) |
|
Testing speed |
From 0.001 to 200mm/min |
|
Accruacy of displacement measurement |
Tolerance: ±0.5%/tolerance:±0.2% |
|
Deformation of measured system according to the requirements |
Min span:10mm, Max range of deformation 800mm Extended deformation span : 25mm, 50mm, 100mm, range of deformation 5mm, 10mm, 25mm |
|
Accuracy of measured deformation |
Tolerance:±0.5% (according to requirement of customer to choose the larger or small deformation) |
|
safety |
Electronic-limit protection |
|
Testing platform moving device |
Fast /slow( two speeds to control) ,can jog |
|
Return Back |
Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation |
|
Overload protection |
Overload 10%, automatic protection |
|
fixture |
A set of tensile clamp |
|
Machine size |
1070*560*2100mm (L*W*H) |
|
Motor |
Panasonic AC servo motor and drive |
|
power |
220V,50HZ or according to the requirement |
|
power |
0.75KW (depending on different demand of force, using different motor) |
|
weight |
500 Kg |
Main feature:
UTM Universal Material Tensile Strength Tester adopted photoelectric encoder to measure the displacement, the controller uses the embedded single-chip microcomputer structure with multi-function software, which combined with measurement, control, culculation and storage. It can automatic calculate the stress, rate of elongation (need to add with extensometers), tensile strength, elastic modulus, automated statistical results; automatically recorded the biggest point, breaking point, the designated point value or the rate of elongation; Using computer to display the dynamic curves in the testing process and process the data, After testing, it can re-analysis and editing the data by amplifying the curves through the graphics processing module, printing reports, product performance reached the international advanced level.
