Computer Type Servo Rubber Tension Tester HZ-1004B

Specifications

computer servo rubber tension tester 
1.Accurate 0.5 grade 
2.tensile,compression,peel test 
3.US load,JP motor 
4.3year warrant 

 

Computer type servo rubber tension tester

 

Equipment summary:

This computer servo rubber tension tester is designed by our company which is made of  aluminum,  it is not only small, used widely,do not take up space, nice appearance, but also easy to move with the hoop,  it is very convenient to operate. It is controlled by computer and printing out the testing report; The outward appearance used the closing board dealing with high-level baking varnish, which obviously elegant appear. It especially suitable for controlling quality in production line, This series of machine is mainly applied to test the non-metallic and metallic materials which the load is less than 2KN. 

 

Corresponding standard :

GB/T16491-1996  electronic universal testing machine

 

Applicable industry:

Computer type servo rubber tension tester widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.

 

Technical parameter: 

Model	HZ-1004Bcomputer type servo rubber tension tester
Max load	500N,1KN,2KN
Accurate grade	1 grade /0.5 grade
Effective measuring range	0.2%~100%(1grade)/0.4%~100%(0.5 grade)
Measuring accuracy	the value ±1%/ the value±0.5%
Tester resolution	Max load 1/200000, constant the resolution
Load sensor	Basic configuration:sensor(max load): one Extended configuration:can add more sensors
Effective tensile space	400,500,600mm(can be increased the height according to customer"s requirement)
Effective testing width	300mm
Range of testing speed	0.001~500mm/min
Accruacy of displacement measurement	Tolerance: ±0.5%/ tolerance: ±0.2%
Safety	Electronic-limit protection
Testing platform moving  device	Fast /slow  two speeds to control,can jog
Return back	Manual or automatic operation,After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection	Overload 10%,automatic protection
Fixture	A set of tensile fixture
Machine size	620×320×2100mmm (lenght*width*height)(including the height of operative table)
Power system	Panasonic AC Servo Motor + Driver
Power supply	220V,50HZ
Power	0.4KW(depending on different demand of force, using different motor)
Machine weight	(about)260 Kg

 

 

 

Main functions:

 

This computer servo rubber tension tester is applied to test all material in tension, compression, bending, shear, peel (90 degrees and 180 degrees), tear or two extended (need to add extensometer) and others, the material such as rubber, plastics,  synthetic leather, tape, adhesive, plastic film, composite materials, electronics, metals and other materials, it can judge the product quality from the test.

 

 

 

Main feature:

 

Adopted photoelectric encoder to measure the displacement, the controller uses the embedded single-chip microcomputer structure with multi-function software, which combined with measurement, control, culculation and storage. It can automatic calculate the stress, rate of elongation (need to add with extensometers), tensile strength, elastic modulus, automated statistical results; automatically recorded the biggest point, breaking point, the designated point value or the rate of elongation; Using computer to display the dynamic curves in the testing process and process the data, After testing, it can re-analysis and editing the data by amplifying the curves through the graphics processing  module, printing reports, product performance reached the international advanced level.

 

 

Software features:

 The software description

A. function of standard modular: provide users with the necessary applications to the test, covering GB, ASTM, DIN, JIS, BS ... and other testing standard specification.

B. tested product information: provide users with the data to set about the products, one time to input and re-use permanently . for improving the accuracy, the data can be corrected by the formula automatically.

C. Dual-Report Editor: provide users with the reported format that users choose (testing program add EXCEL reported format, Extend the previous single pattern of statements)

D. the data’s unit of length and force can be exchanged, unit of force is T, Kg, N, KN, g, lb, unit of length is mm, cm, inch.

E. auto-optimization of graphic scale, display the best measurment of graphics. It can test the moving exchange in graphics. It has the load - displacement, load - time, displacement - time, stress - strain load -2 points extending maps, and lots of graph compared.

F. Test results can be output in EXCEL format.
 

2.The accessories

A. warranted book within one-year and operating instructions.

B. a group of fixture

C. testing software for tensile machine.

D. a set of brand computer, color printer