Specifications
2.panasonic motor and USA load cell
3.Max Load:10KN
4.Speed:0.01-250mm/min
Tensile compression bending machine/ Universal test machine
Equipment summary:
Thisuniversal tensile compression bending machineis designed by mechanical-electrical integration, composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive , computer and color inkjet printer. High-precision electronic motor can be set to five-speed, the components are connected by plug-way, Floor-standing models, it is taken account of modern industrial design and ergonomics in modeling and coating.
Theuniversal tensile and elongation test machinecan be tested all the materials in stretch, compression, bending, shear, embedded relay, peeling, tearing, crack, etc,such as rubber, plastics, leather,
The implementation of standards and standard configuration:
1. GB/T4689.20-1996 measuring fastness of leathers adhesion
2. QB/T2710-2005 measuring leathers expansion and the rate of elongation
3. QB/T2711-2005 measuring tear force of leather
4. QB/T2712-2005 measuring leathers strength and stretch of spherical crack test
Technical parameters
load cell |
5KN or 1ton option |
resolution of force |
1/200000 |
accuracy of force |
≤0.5% |
Power magnification |
7 automatic switching |
displacement resolution |
1/1000 |
accuracy of displacement |
≤0.5% |
resolution of extensometer |
1/1000 |
accuracy of extensometer |
≤0.5% |
Range of speed |
0.01-250mm/min(according to the needs of customer) |
Effective Tensile stroke |
800mm;1000mm;1200mm,(can be increased the height according to customer’s requirement) |
testing width |
380mm(can be increased the width) |
power supply |
220V |
power |
|
machine size |
|
machine weight |
|
Specifications:
1.Computer Servo Typeuniversal tensile compression bending machine A. High-precision sensor 5KN (1ton) from U.S.A. Accurate Forces within ± 0.5%.
B. High-precision 24 bits A / D, sampling frequency 200Hz
C. Power System: Panasonic AC Servo Motor + Driver + CAVEX + precision ball screw
D. Control System: it is more precise using Pulse Command control modem, the range in speed control is 0.01 ~ 250 mm / min.the board of iron can be adjust to fast and slow by the control board. it is automatically saved after testing .
E. Data transmission: RS232 Transfer
F. Display: windows XP test software.
G. easy to control five speed and calibration system.
H. test software can precision control in position, speed, rate of load force and rate of stress, satisfy the different requirements of test.
I. Test space: Testing width is
J. displacement: coder 2500 P / R, increase four-time accuracy. adopt Japanese Lejing coder that has strong anti-jamming capability, displacement resolution 0.001mm.
Small deformation:
K. Safe equipment : the system would shut down if overload or over-trip
2. The accessories
A. warranted book within one-year and operating instructions.
B. a group of fixture
C. testing software for tensile machine.
D. a set of brand computer, color printer
3. Items can be tested in theuniversal tensile compression bending machineCommon items: ( display data and calculation )
tensile stress tensile strength
tensile strength rate of elongation at break
fixed stress rate of stress at break
stress strength tear strength
the value of force at any point rate of elongation at any point
pull-out strength force of adhesion and value of peak